Pendant installation guide
Before you install, make sure the electrical circuit is switched off. We recommend that all electrical products be installed by a qualified professional. For all models with unfinished fittings, we recommend wearing gloves during installation to avoid fingerprints.
Recommended bulb
Ø20: E27 Max 25W, 2700K
Ø30, Ø35, Ø40: E27 Max 40W, 2700K
What you'll need
- 1 x Drill/driver
- 1 x Rawlplug
- 1 x Ceiling hook
Step 1
Begin by turning off the power at the main circuit breaker.
Step 2
Install ceiling hook.
Step 3
Find the steel wire beneath the canopy and turn it clockwise to release it. You can now slide the canopy down the steel wire to access the installation.
Step 4
Raise the lamp canopy to the ceiling, covering the electrical box. Secure it in place with the provided screws or nuts.
Step 5
Adjust the length of the cord and connect it to the junction connector. Then connect the wire from your circuit installation to the junction connector. Match the wires by color.
Step 6
Install the recommended light bulb into the socket. Do not exceed the maximum wattage specified.
Step 7
Install the bulb.
Step 8
Once the lamp is fully assembled, turn the power back on at the main fuse box.
Step 9
Turn on the electrical circuit.
