Pendant installation guide
Before installing, make sure the electrical circuit is turned off at the main fuse box to prevent electrical shock. It is recommended that the installation be performed by a qualified electrician.
Recommended bulb
Ø20: E27 Max 25W, 2700K
Ø30, Ø35, Ø40: E27 Max 40W, 2700K
What you need
- 1 x Drill/screwdriver
- 1 x Rawlplug
- 1 x Ceiling hook
Step 1
Carefully unpack your new Murano glass lamp. Check that all parts are included. Handle the glass with care to avoid scratches.
Step 2
Attach the mounting bracket to the ceiling electrical box using the screws provided. Ensure the bracket is secure.
Step 3
Connect the electrical wires from the lamp to the wires in the ceiling box. Typically, black to black, white to white, and green/copper to the ground wire.
Step 4
Raise the lamp canopy to the ceiling, covering the electrical box. Secure it in place with the provided screws or nuts.
Step 5
Adjust the length of the cord or chain to your desired height. Most lamps have an adjustment mechanism for this purpose.
Step 6
Install the recommended light bulb into the socket. Do not exceed the maximum wattage specified.
Step 7
Carefully attach the Murano glass shade to the lamp fixture. Follow the specific instructions for your lamp model to secure it properly.
Step 8
Once the lamp is fully assembled, turn the power back on at the main fuse box.
Step 9
Test the lamp by turning on the light switch. Enjoy the beautiful ambiance of your new Murano glass lamp.
